Lull 1044C-54 Series II Service Manual - Manual (Page 47)

General Maintenance
31200079 3-3
Replacement Parts
General
Record the machine model, serial number, and component serial numbers
for reference when ordering replacement parts. See “Serial Number
Locations” in Section 2.
Use only JLG authorized replacement parts and fluids. Use of parts other
than JLG authorized parts may adversely effect machine reliability,
performance, and safety and may void the warranty.
JLG assumes no liability for equipment damages caused by the use of
unauthorized replacement parts.
Lubrication
General
For best machine performance, follow the instructions found on the
machine’s service lubrication schedule.
• Clean around all oil fill holes before checking or adding oil.
• Keep all lubricants and lubricating equipment clean and free of foreign
matter both while in use and while in storage.
• Wipe off any excess lubricants that spill or overflow. Oily or greasy sur-
faces tend to collect dirt and foreign matter which can work its way into
bearings and gears.