Lull 1044C-54 Series II Service Manual - Manual (Page 335)

Transmission
31200079 8-11
2. Attach the transmission to the rear mounting bracket (6) with two
capscrews (4) and two lockwashers (5). Torque the capscrews to 148
lb-ft (200 Nm).
3. Install four capscrews (11), four flat washer (12), four lockwashers (13)
and four hex nuts (14). Torque the capscrews to 148 lb-ft (200 Nm).
4. Install the two rubber mounts (1) and the rear transmission mounting
bracket (2) on the transmission with two capscrews (7), two mounting
washers (17), two flat washers (8), two lockwashers (9) and two hex
nuts (10)
5. Remove the hoist or overhead crane and sling.
Fig. 8-10: Install the Transmission
6. Secure the wiring harness to the transmission housing.
7. Connect the transmission oil cooler inlet (18) and outlet (19) hose at
the transmission.
8. Install the hydraulic pump.
MV0270
7
3
4
5
6
1
11
12
13
14 10
9
8 2
17