Lull 1044C-54 Series II Service Manual - Manual (Page 331)

Transmission
31200079 8-7
Fig. 8-5: Disconnect the Battery Negative (-) Cable
7. Thoroughly clean the transmission and surrounding area, including all
hoses and fittings, before proceeding.
8. Place a suitable receptacle under the transmission drain plug. Remove
the transmission drain plug (2), and allow the transmission oil to drain
into the receptacle.
9. Transfer the used transmission oil into a suitable, covered container,
and label the container as “Used Oil.” Dispose of used oil at an
approved recycling facility. Clean and reinstall the transmission drain
plug.
Fig. 8-6: Drain Transmission Oil
10. Remove the engine-to-transmission drive shaft.
11. Remove the transmission-to-axle drive shafts.
12. Remove the hydraulic pump.
MV0190
1
MV0200
2