Rockwell Automation 1395 Multi-Comm Hardware/Software - Manual (Page 103)

Chapter 8
Reference
8–8
Parameter Descriptions
The format used to provide information about MCA board parameters is as
follows:
Parameter AAA [Parameter name]
BBB [Parameter name]
Use:
Parameter Type:
Program Terminal Units:
Minimum Value:
Maximum Value:
Default Value:
Description:
Parameter AAA –
The parameter number if the Adapter is installed in
Port A.
Parameter BBB – The parameter number if the Adapter is installed in
Port B.
[Parameter name] – The parameter name as viewed on a program
terminal.
Use – A brief description of the parameter function.
Parameter Type – Specifies the type of parameter. Two types are
available on the MCA board:
Configuration parameters – These parameters contain real time
information. They can be linked to Drive parameters or other MCA board
parameters.
Setup parameters – These parameters are used to control MCA board
functions and features.
Program Term Units – The engineering units used when displaying a
parameter on a program terminal.
Minimum Value – The minimum allowable value for a parameter. If
no minimum value is given, the parameter has not
been assigned a minimum limit. This value is
displayed on program terminals.
Maximum Value – The maximum allowable value for a parameter. If
no maximum value is given,the parameter has not
been assigned a maximum limit. This value is
displayed on program terminals.
Default Value – The default parameter value stored in the Drive.
The default values replace present values when a
System Initialize command is given to the Drive.
Description – A detailed description of the use and operation of
the parameter.