Dh+ installation – Rockwell Automation 1395 Multi-Comm Hardware/Software User Manual
Page 83
Advertising
Chapter 4
Installation
4–8
DH+ Installation
Connection to an Allen-Bradley DH+ network requires two basic
procedures to be followed:
S The MCA board DIP switches must be configured for the desired setup.
S The physical wire connections to the board are made.
Switch settings for DH+ Station Address (switch U6 channel A, and
U15 channel B):
Switch positions 3–8 determine the station address of the MCA adapter.
Refer to Table 4–H for details.
Advertising