Rockwell Automation 1395 Multi-Comm Hardware/Software - Manual (Page 99)

Chapter 8
Reference
8–4
S #309 – #314 Comm Adapter Source Parameters
S #350 – #356 Port B Channel A Sinks
S #357 – #363 Port B Channel B Sinks
S #364 – #369 Comm Adapter Indirect Sinks
S #400 – #406 Port A Channel A Source Parameters
S #407 – #413 Port A Channel B Source Parameters
S #450 – #456 Port A Channel A Sinks
S #457 – #463 Port A Channel B Sinks
S #464 – #469 Comm Adapter Indirect Sinks
S #500 – #524 Port B Comm Adapter Setup Parameters
S #525 – #536 Port B Channel A Setup Parameters
S #537 – #549 Port B Channel B Setup Parameters
S #550 – #574 Port A Comm Adapter Setup Parameters
S #575 – #586 Port A Channel A Setup Parameters
S #587 – #599 Port A Channel B Setup Parameters
The column headings in table 8–B are defined as follows:
DEC – The parameter number in decimal format.
HEX – The parameter number in hexidecimal format.
NAME – The parameter name as it appears on a program terminal
UNITS – Indicates the engineering units used to display a parameter
value when viewed on a program terminal.
INIT – The default parameter value stored in the Drive. The
default values replace present values when a System
Initialize command is given to the Drive.
MIN – The minimum allowable value for a parameter. If no
minimum value is given, the parameter has not been
assigned a minimum limit.
MAX – The maximum allowable value for a parameter. If no
maximum value is given, the parameter has not been
assigned a maximum limit.
EE – Indicates whether the parameter value is backed up in
Drive EEPROM memory. In general, only setup parameter
values are stored in EEPROM memory.
FUNCTION – Indicates the parameter type. The parameter type
determines how the parameter is treated by the Drive and
what type of information is contained within the parameter.
PORT – All Adapter board parameter numbers are determined by
the Drive Adapter Port that the board is mounted in. When
moving an Adapter board from one port to another, the
functionality of the board remains the same, but specific
functions will change.