Rockwell Automation 1395 Multi-Comm Hardware/Software - Manual (Page 6)

Chapter 1
Before You Begin
1–3
Safety Precautions
The following types of precautionary statements will be found in this
manual.
IMPORTANT: Identifies particular areas of concern for correct board,
processor or drive operation.
!
ATTENTION: Tells you where machinery may be damaged or
economic loss can occur if procedures are not followed
properly.
Or it tells you where people may be hurt if procedures are not
followed properly.
Manual Organization
Table 1–A provides a brief overview of topics covered in this manual and
their location within the book.
Chapter Title Topics
2
3
4
5
6
Introduction and
Product Description
Configuration & In-
terfaces
Startup & Installa-
tion
Troubleshooting &
Maintenance
Reference
Table 1-A.
Manual Organization
Board Identification, Hardware Content,
Hardware requirements for Interfacing.
Configuring the Drive for the MCA
board and interfacing the Drive with a
PLC controller.
Unpacking & Inspection, mounting, wir-
ing,switch settings and configuration.
Diagnostics and Fault Messages.
Table of all MCA configuration and set-
up parameters.
Specifications
Electrical:
Board power provided by Drive
Discrete Input
24VDC or 115VAC, jumper
selectable
Environmental:
Ambient Operating Temperature
0
°
to 60
°
C (32
°
to 140
°
F)
Storage Temperature –40
°
to +85
°
C (–40
°
to +185
°
F)
Relative Humidity 5% to 95% non-condensing
Firmware Version 1.xx