Rockwell Automation 1395 Multi-Comm Hardware/Software - Manual (Page 138)

Table of Contents
8–43
Parameter 456 – [A>ChA DH Out 5]
Parameter 356 – [B>ChA DH Out 5]
Use: Channel A DH+ output word #5
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast sink that provides data to other
devices on the network through the DH+ message instruction. The node
address is detemined by the DIP switch settings for channel A. The data
to be attached is determined by the configuration link made to this
parameter.
Parameter 457 – [A>ChB DH TPOut 0]
Parameter 357 – [B>ChB DH TPOut 0]
Use: Channel B DH+ Token Pass with data output word #0
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast sink that attaches data to the global
data table passed with the network token. The node address is determined
by the DIP switch settings for channel B. The data to be attached is
determined by the configuration link made to this parameter.
Parameter 458 – [A>ChB DH TPOut 1]
Parameter 358 – [B>ChB DH TPOut 1]
Use: Channel B DH+ Token Pass with data output word #1
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast sink that attaches data to the global
data table passed with the network token. The node address is detemined
by the DIP switch settings for channel B. The data to be attached is
determined by the configuration link made to this parameter.