Rockwell Automation 1395 Multi-Comm Hardware/Software - Manual (Page 122)

Chapter 8
Reference
8–27
Parameter 411 – [A>ChB RIO In 5]
Parameter 311 – [B>ChB RIO In 5]
Use: Channel B RIO Input word #5
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast source that contains the fifth word
or group of data from the PLC controller output image table. The data is
transferred to the Drive by the RIO scanner every rack scan. The value
can be used by the MCA board directly or by other Drive functions
through a configuration link. This parameter is only available on channels
that are setup as full or 3/4 racks.
Parameter 412 – [A>ChB RIO In 6]
Parameter 312 – [B>ChB RIO In 6]
Use: Channel B RIO Input word #6
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast source that contains the sixth word
or group of data from the PLC controller output image table. The data is
transferred to the Drive by the RIO scanner every rack scan. The value
can be used by the MCA board directly or by other Drive functions
through a configuration link. This parameter is only available on channels
that are setup as full racks.
Parameter 413 – [A>ChB RIO In 7]
Parameter 313 – [B>ChB RIO In 7]
Use: Channel B RIO Input word #7
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast source that contains the seventh
word or group of data from the PLC controller output image table. The
data is transferred to the Drive by the RIO scanner every rack scan. The
value can be used by the MCA board directly or by other Drive functions
through a configuration link. This parameter is only available on channels
that are setup as full racks.