Dip switch orientation, Board location – Rockwell Automation 1395 Multi-Comm Hardware/Software User Manual
Page 11
Advertising
Chapter 2
Introduction and Product Description
2–4
DIP Switch Orientation
DIP Switch orientation (Figure 2–2) on the MCA board is as Follows:
CLOSED = “ON” = “1”
OPEN= “OFF” = “0”
Figure 2-2. DIP Switch Orientation
On On Off Off
Board Location
The standard mounting position for the MCA board is Port B of the Drive
(Refer to Figure 2–3). If required, the Adapter can be mounted in Port A.
Note that each port uses different parameters to store Adapter setup and
configuration information.
Figure 2-3. MCA Board Mounted in Port B
AB0747A
J2
J3
*
*
J1
J1
*
*
MultiĆCommunications
Adapter (MCA) Board
Advertising