Rockwell Automation 1395 Multi-Comm Hardware/Software - Manual (Page 137)

Table of Contents
8–42
Parameter 453 – [A>ChA DH Out 2]
Parameter 353 – [B>ChA DH Out 2]
Use: Channel A DH+ output word #2
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast sink that provides data to other
devices on the network through the DH+ message instruction. The node
address is determined by the DIP switch settings for channel A. The data
to be attached is determined by the configuration link made to this
parameter.
Parameter 454 – [A>ChA DH Out 3]
Parameter 354 – [B>ChA DH Out 3]
Use: Channel A DH+ output word #3
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast sink that provides data to other
devices on the network through the DH+ message instruction. The node
address is determined by the DIP switch settings for channel A. The data
to be attached is determined by the configuration link made to this
parameter.
Parameter 455 – [A>ChA DH Out 4]
Parameter 355 – [B>ChA DH Out 4]
Use: Channel A DH+ output word #4
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast sink that provides data to other
devices on the network through the DH+ message instruction. The node
address is detemined by the DIP switch settings for channel A. The data
to be attached is determined by the configuration link made to this
parameter.