Adding a new hot spare pool – Compex Systems Advanced SerialRAID Adapters SA33-3285-02 User Manual
Page 103
Adding a New Hot Spare Pool
This option allows you to add a new hot spare pool. If you are not sure how to
configure hot spare pools, read Chapter 5, “Hot Spare Management” on page 45 before
you proceed.
1. For fast path, type
smitty add_hsm_pool_adap
and press Enter.
Otherwise, select Add a Hot Spare Pool from the SSA RAID Arrays menu.
2. A list of adapters is displayed in a window:
SSA RAID Arrays
Move cursor to desired item and press Enter.
List All Defined SSA RAID Arrays
List All Supported SSA RAID Arrays
List All SSA RAID Arrays Connected to a RAID Manager
List Status Of All Defined SSA RAID Arrays
List/Identify SSA Physical Disks
List/Delete Old RAID Arrays Recorded in an SSA RAID Manager
List Status of Hot Spare Pools
List Status of Hot Spare Protection for an SSA RAID Array
List Components in a Hot Spare Pool
Add a Hot Spare Pool
--------------------------------------------------------------------------
|
SSA RAID Manager
|
|
|
| Move cursor to desired item and press Enter.
|
|
|
|
ssa0 Available 00-04 IBM SSA 160 SerialRAID Adapter (14109100)
|
|
|
| F1=HelpF2=Refresh
F3=Cancel
|
| F8=Image
F10=Exit
Enter=Do
|
| /=Find
n=Find Next
|
--------------------------------------------------------------------------
Select the adapter to which you want to add the hot spare pool.
Chapter 6. Using the RAID Array Configurator
83