Compex Systems Advanced SerialRAID Adapters SA33-3285-02 - Manual (Page 388)

ssa_servicemode Command
Purpose
To put the disk drive into Service Mode (set Service Mode), or to remove the disk drive
from Service Mode (reset Service Mode).
Syntax
ssa_servicemode -l [-a AdapterName] -y|-n
Description
The ssa_servicemode command opens the adapter special file, and sends the
appropriate IACL command to put the disk drive into, or remove it from, Service Mode.
When the Service Mode has been successfully set or reset, the IACL command closes
the adapter special file. If Service Mode cannot be set or reset for any reason, the cop
command prints the appropriate error message.
Flags
-l pdisk
Specifies the pdisk that you want to put into, or remove from, Service Mode.
-a AdapterName
Specifies the adapter to which the pdisk is connected.
-y Puts the pdisk into Service Mode (set Service Mode).
-n Removes the pdisk from Service Mode (reset Service Mode).
Output
The ssa_servicemode command sends all error messages to stderr.
368 User’s Guide and Maintenance Information