Compex Systems Advanced SerialRAID Adapters SA33-3285-02 - Manual (Page 396)

Starting the SSA Service Aids
To start the SSA service aids:
1. Start the using-system diagnostics (see the Diagnostic Information for Multiple Bus
Systems manual), and go to the Diagnostic Operating Instructions.
2. Follow the instructions to select Function Selection.
3. Select Task Selection from the Function Selection menu.
4. Select SSA Service Aids from the Tasks Selection list.
The SSA Service Aids menu is displayed:
SSA SERVICE AIDS 802380
Move cursor onto selection, then press Enter.
Set Service Mode
Link Verification
Configuration Verification
Format Disk
Certify Disk
Display/Download Disk Drive Microcode
Link Speed
Physical Link Configuration
Enclosure Configuration
Enclosure Environment
Enclosure Settings
SMIT-SSA RAID Arrays
SMIT-SSA Disks
F3=Cancel F10=Exit
Notes:
a. In some configurations of the using-system console:
Esc and 0 = Exit
Esc and 3 = Cancel
In such configurations, however, the displayed instructions for the function keys
remain the same as those shown in the screen above.
b. For some versions of AIX and for stand-alone diagnostics, the format of the
service aid displays might be slightly different from that shown in this chapter.
Functionally, however, the displays remain the same.
376 User’s Guide and Maintenance Information