Compex Systems Advanced SerialRAID Adapters SA33-3285-02 - Manual (Page 356)

Removing the Battery Assembly from the Fast-Write Cache Option Card of an
Advanced SerialRAID Adapter
Attention:
v The adapter assembly contains parts that are electrostatic-discharge (ESD) sensitive.
Use the tools and procedures defined by your organization to protect such parts.
v The Fast-Write Cache Option card might contain customer data.
1. Remove the adapter from the using system (see the Installation and Service Guide
for the using system).
2. Remove the Fast-Write Cache Option card (see “Removing the Fast-Write Cache
Option Card of an Advanced SerialRAID Adapter” on page 332).
3. Refer to Figure 50.
4. Attention: The battery falls when it is released from the Fast-Write Cache Option
card.
Hold the Fast-Write Cache Option card approximately 10 mm (0.5 in.) above a work
surface.
5. Press the clip
1
. The battery assembly falls through the hole in the Fast-Write
Cache Option card.
1
Figure 50. Releasing the Battery Assembly
336 User’s Guide and Maintenance Information