Compex Systems Advanced SerialRAID Adapters SA33-3285-02 - Manual (Page 199)

List All Copy Candidates
For fast path, type smitty copy_lstcopycand and press Enter.
Otherwise, select List All Copy Candidates from the Array Copy Services menu.
The following information is displayed:
COMMAND STATUS
Command: OK stdout: yes stderr: no
Before command completion, additional instructions may appear below.
Array Array Type Coupled Disks Copy State
hdisk3 raid_10 None Not Copying 0%
hdisk4 raid_10 pdisk8 Copying 73%
pdisk9
pdisk10
F1=HelpF2=Refresh F3=Cancel F6=Command
F8=Image F9=Shell F10=Exit /=Find
n=Find Next
The columns of information displayed on the screen have the following meanings:
Array The hdisk name of the RAID array. This field contains the array serial number
if the array is not configured.
Array Type
The type of array listed. This is raid_1 or raid_10
Coupled Disks
Disk drives to which the array data is being copied.
Copy State
The operational state of the array copy:
Not Copying
No copy is being created for this array.
Good The coupled disk drives contain an exact copy of the data that is on
the array. The copy must be in the Good state before it can be
uncoupled from the array.
Chapter 7. Copying Data from Arrays and from Volume Groups 179
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
|