Compex Systems Advanced SerialRAID Adapters SA33-3285-02 - Manual (Page 233)

Getting Access to the Fast-Write Menus
1. For fast-path access to the Fast-Write SMIT menus, type smitty ssadlog and press
Enter.
Otherwise:
a. Type smitty and press Enter. The System Management menu is displayed.
b. Select Devices. The Devices menu is displayed.
c. Select SSA Disks. The SSA Disks menu is displayed.
d. Select SSA Logical Disks.
2. The SSA Logical Disks menu is displayed:
SSA Logical Disks
Move cursor to desired item and press Enter.
List All Defined SSA Logical Disks
List All Supported SSA Logical Disks
Add an SSA Logical Disk
Change/Show Characteristics of an SSA Logical Disk
Remove an SSA Logical Disk
Configure a Defined SSA Logical Disk
Generate an Error Report
Trace an SSA Logical Disk
Show Logical to Physical SSA Disk Relationship
List Adapters Connected to an SSA Logical Disk
List SSA Logical Disks Connected to an SSA Adapter
Identify an SSA Logical Disk
Cancel all SSA Disk Identifications
Enable/Disable Fast-Write for Multiple Devices
F1=HelpF2=Refresh F3=Cancel F8=Image
F9=Shell F10=Exit Enter=Do
If you want to enable or disable a fast-write attribute for one logical disk drive, see
“Enabling or Disabling Fast-Write for One Disk Drive” on page 214.
If you use the two-way fast-write function, and you want to disable the fast-write
attribute for a disk drive if the partner adapter becomes not accessible, see “Bypassing
the Cache in a One-Way Fast-Write Network” on page 217.
Chapter 10. Using the Fast-Write Cache Feature 213