Compex Systems Advanced SerialRAID Adapters SA33-3285-02 - Manual (Page 209)

Identify Disks in an SSA RAID Array
For fast path, type smitty issaraid and press Enter.
Otherwise, select Identify Disks in an SSA RAID Array from the List/Identify SSA
Physical Disks menu.
The following information is displayed for RAID arrays that have coupled disk drives:
Identify Disks in an SSA RAID Array
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
SSA RAID Manager ssa1
SSA RAID Array hdisk2
Primary Disks [] +
Secondary Disks [] +
Coupled Disks [] +
Flash Disk Identification Lights yes +
F1=HelpF2=Refresh F3=Cancel F4=List
F5=Reset F6=Command F7=Edit F8=Image
F9=Shell F10=Exit Enter=Do
1. For the primary, secondary, and coupled disk drives, press the List key to list the
disk drives that you want to identify.
2. From the menu shown, select each disk drive that you want to identify, and press
Enter.
3. Select yes in the Flash Disk Identification Lights field.
Chapter 7. Copying Data from Arrays and from Volume Groups 189
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|