Adding disks to – Compex Systems Advanced SerialRAID Adapters SA33-3285-02 User Manual
Page 106
Adding Disks to, or Removing Disks from, a Hot Spare Pool
This option allows you to exchange the disk drives that are in the hot spare pool, or to
resynchronize the state of the pool. If you are not sure how to configure hot spare
pools, read Chapter 5, “Hot Spare Management” on page 45 before you proceed.
1. For fast path, type
smitty chg_hsm_pool_adap
and press Enter.
Otherwise, select Change/Show/Delete a Hot Spare Pool from the SSA RAID
Arrays menu.
2. A list of adapters is displayed in a window:
SSA RAID Arrays
Move cursor to desired item and press Enter.
List All Defined SSA RAID Arrays
List All Supported SSA RAID Arrays
List All SSA RAID Arrays Connected to a RAID Manager
List Status Of All Defined SSA RAID Arrays
List/Identify SSA Physical Disks
List/Delete Old RAID Arrays Recorded in an SSA RAID Manager
List Status of Hot Spare Pools
List Status of Hot Spare Protection for an SSA RAID Array
List Components in a Hot Spare Pool
--------------------------------------------------------------------------
|
SSA RAID Manager
|
|
|
| Move cursor to desired item and press Enter.
|
|
|
|
ssa0 Available 04-03 IBM SSA 160 SerialRAID Adapter (14109100)
|
|
ssa1 Available 04-02 IBM SSA 160 SerialRAID Adapter (14109100)
|
|
|
| F1=HelpF2=Refresh
F3=Cancel
|
| F8=Image
F10=Exit
Enter=Do
|
F| /=Find
n=Find Next
|
--------------------------------------------------------------------------
Select the adapter on which you want to change the hot spare pool.
86
User’s Guide and Maintenance Information