Compex Systems Advanced SerialRAID Adapters SA33-3285-02 - Manual (Page 376)

-t [threshold]
Displays all the temperature thresholds, or only the specified temperature
thresholds. The valid values for the [threshold] parameter are:
lowarn The low-temperature warning threshold.
locrit The low-temperature critical threshold.
hiwarn The high-temperature warning threshold.
hicrit The high-temperature critical threshold.
-a Displays the ambient temperature of the enclosure.
-f [fan] Displays the status of all the fans, or of only the specified fans. Valid values for
the [fan] parameter are: 1, 2, 3, and so on.
-d [drive_bay]
Displays the status of all the disk drive bays (slots), or of only the specified
disk drive bays. Valid values for the [drive_bay] parameter are: 1, 2, 3, and so
on.
-p [PSU]
Displays the status of all the power supply assemblies, or of only the specified
power supply assemblies. Valid values for the [PSU] parameter are 1, 2, 3,
and so on.
-o Displays the status of the operator panel.
-c Displays the status of the controller card.
-e Displays trace information (for service use only)
-I ID[-U]
Modifies the enclosure ID. The ID must be a four-character alphanumeric
string. The optional -U flag causes the object data manager (ODM) to be
updated to show the change.
-B mode
Modifies all bypass cards to the given mode.
-B card=mode
Modifies the specified bypass cards to be in the given modes. The valid values
for the mode parameter are:
v Automatic
v Bypass
v Inline
v Open
Valid values for the card parameter are 1, 4, 5, 8, 9, 12, 13, 16.
-S Resets the “exchanged” flag of the selected FRU.
-S d[drive_bay ...]
Resets the flag for the selected disk drive bay (slot). Valid values for drive_bay
are 1, 2, 3, and so on.
356 User’s Guide and Maintenance Information
||
|
|
|