Compex Systems Advanced SerialRAID Adapters SA33-3285-02 - Manual (Page 362)

-t This optional flag allows new levels of microcode to be tested. The enclosure
returns to the original level of microcode if the enclosure power is switched off,
then switched on.
Examples
To install the latest level of microcode on all available SES enclosures, give the
command:
ssa_sesdld -u
To install microcode file coral1014.hex on enclosure0, give the command:
ssa_sesdld -d enclosure0 -f /etc/microcode/coral1014.hex
To install microcode file coral1014.hex on all available SES enclosures whose existing
level of microcode is lower than coral1014, give the command:
ssa_sesdld -f /etc/microcode/coral1014.hex -u
To install microcode file coral1014.hex on enclosure0 only if the existing level of
microcode on enclosure0 is lower than coral1014, give the command:
ssa_sesdld -d enclosure0 -f /etc/microcode/coral1014.hex -u
342 User’s Guide and Maintenance Information
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|