Compex Systems Advanced SerialRAID Adapters SA33-3285-02 - Manual (Page 139)

Identifying the Disk Drives in an SSA RAID Array
This option allows you to identify the disk drives that are contained in a particular array.
1. For fast path, type smitty issaraid and press Enter.
Otherwise:
a. Select List/Identify SSA Physical Disks from the SSA RAID Arrays menu.
b. Select Identify Disks in an SSA RAID Array.
2. A list of arrays is displayed in a window:
List/Identify SSA Physical Disks
Move cursor to desired item and press Enter.
List Disks in an SSA RAID Array
List Hot Spares
List Rejected Array Disks
List Array Candidate Disks
List System Disks
Identify Disks in an SSA RAID Array
Identify Hot Spares
Identify Rejected Array Disks
Identify Array Candidate Disks
--------------------------------------------------------------------------
| SSA RAID Array |
| |
| Move cursor to desired item and press Enter. |
| |
| hdisk3 095231779F0737K good 3.4G RAID-5 array |
| hdisk4 09253173A02137K good 3.4G RAID-5 array |
| |
| F1=HelpF2=Refresh F3=Cancel |
| F8=Image F10=Exit Enter=Do |
| /=Find n=Find Next |
--------------------------------------------------------------------------
Select the array whose disk drives you want to identify.
Note: The menu shown here is displayed when you select a RAID-5 array. If you
select a RAID-1 or a RAID-10 array, two lists of disk drives are available.
One list is for primary disk drives; the other is for secondary disk drives.
Chapter 6. Using the RAID Array Configurator 119
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|