Compex Systems Advanced SerialRAID Adapters SA33-3285-02 - Manual (Page 63)

Getting Access to the SSA RAID Arrays SMIT Menu
1. For fast-path access to the SSA RAID Array SMIT menus, type smitty ssaraid and
press Enter.
Otherwise:
a. Type smitty and press Enter. The System Management menu is displayed.
b. Select Devices. The Devices menu is displayed.
c. Select SSA RAID Arrays.
2. The SSA RAID Arrays menu is displayed:
SSA RAID Arrays
Move cursor to desired item and press Enter.
List All Defined SSA RAID Arrays
List All Supported SSA RAID Arrays
List All SSA RAID Arrays Connected to a RAID Manager
List Status Of All Defined SSA RAID Arrays
List/Identify SSA Physical Disks
List/Delete Old RAID Arrays Recorded in an SSA RAID Manager
List Status of Hot Spare Pools
List Status of Hot Spare Protection for an SSA RAID Array
List Components in a Hot Spare Pool
Add a Hot Spare Pool
Add an SSA RAID Array
Delete an SSA RAID Array
Change/Show Attributes of an SSA RAID Array
Change Member Disks in an SSA RAID Array
Change/Show Use of an SSA Physical Disk
Change Use of Multiple SSA Physical Disks
Change/Show/Delete a Hot Spare Pool
F1=HelpF2=Refresh F3=Cancel F8=Image
F9=Shell F10=Exit Enter=Do
For more information about how to use this menu, go to Chapter 6, “Using the RAID
Array Configurator” on page 57.
Chapter 4. Using the SSA SMIT Menus 43