Rice Lake Static Weighing - Manual (Page 20)

16 CW-90/90X Checkweigher
3.2 Audit Menu
The audit menu accesses audit trail support. It provides tracking information for configuration and calibration
events. To prevent potential misuse, all configuration and calibration changes are counted as change events. Audit
information can be printed by pressing the
PRINT key while displaying the audit trail items beneath the AUDIT
menu.
CALIB
Number
EXIT
EXIT T&D TEST SETUP AUDIT XXXXXXX CALIBR BRIGHT ACCUM
Only displayed if
turned on
from Setup menu
ID
Only displayed if
turned on
from Setup menu
LR,V. CONFIG
Number
Figure 3-3. Audit Menu
Table 3-2. Audit Menu Parameters
AUDIT Menu
Parameter Description
LR.V. Legally relevant firmware version.
CALIB Number Displays total calibration events. The display alternates (in one-second intervals) between CALIB and the
four-digit number.
CONFIG
Number Displays total configuration events. The display alternates (in one-second intervals) between CFG and the
four-digit number.
EXIT Exits the audit trail and returns to weigh mode.