Rice Lake Static Weighing - Manual (Page 62)

Press to cycle the active character to the next character
Press to cycle the active character to the previous character
Same as GFMT
SCALE FEATUR SERIAL DIGIO PFORMT VERS
GFMT NFMT ACC.FMT STRM.FM BUF.FMT H1 H2
Display first 6
characters of format
Scroll left in formatting string
Press TARE to insert a space
before the active character
Press ZERO to delete the active character
Scroll right in formatting string
NOTE: To change the active character,
use the numeric keypad to enter the new
ASCII value and press the ENTER key.
CONFIG
EXIT T&D TEST SETUP AUDIT XXXXXXX CALIBR BRIGHT ACCUM
Only displayed if
turned on
from Setup menu
ID
Only displayed if
turned on
from Setup menu
58 CW-90/90X Checkweigher
Figure 7-1. PFORMT Menu, Showing Alphanumeric Character Entry Procedure
7.2.3 Using Revolution
®
The Revolution configuration utility provides a print formatting grid with a tool bar. The grid allows you to
construct the print format without the formatting commands (<NL> and <SP>) required by the front panel or EDP
command methods. Using Revolution, you can type text directly into the grid, then select weight value fields from
the tool bar and place them where you want them to appear on the printed ticket.
Figure 7-2 shows an example of the Revolution print formatting grid.
Figure 7-2. Revolution Print Format Grid