Rice Lake Signal Conditioning Transmitter/Indicators - Manual (Page 12)

8 SCT Weight Transmitter Operator’s Manual
Key Functions
The LEDs light up in sequence to indicate that a setting and not a weight is being viewed.
After pressing the first digit will flash and can be edited. All LEDs will be flashing, the value is a displayed
weight.
For Numeric Entries:
Press to select desired digit.
Pres s to increment digit.
KEY Short press
Long press
(3 sec) Into menus
Escape
Zero Setting Escape from a parameter or return to previous menu or operation mode.
Scroll/
Backspace
Captures Tare
Gross
 Net
Removes Tare
Net
 Gross
Move to the previous parameter in a level or scroll to the next digit in a
parameter value.
Next/ Data
Entry
Save to alibi memory
(if present) mV load cell
test Move to the next parameter in a level or increment a value in a parameter.
Enter
Setting setpoints and
hysteresis Move to next level of configuration or select and edit a parameter.
+ Enter configuration for setting general parameters (press and hold then press to enter set-up menu.
+ Setting preset tare (press and hold then press to enter set-up menu.
Note
Note