Rice Lake Signal Conditioning Transmitter/Indicators - Manual (Page 9)

Introduction 5
File Number:E151461
Power Supply and Consumption (VDC) 12 - 24 VDC +/- 10% ; 5 W
No. of Load Cells in Parallel And Supply max 8 ( 350 ohm ) ; 5VDC/120mA
Linearity / Analog Output Linearity < 0.01% F.S. / < 0.01% F.S.
Thermal Drift < 0.0005 % F.S. /°C ;
< 0.003 % F.S./°C (Analog Only)
A/D Converter 24 bit (16.000.000 points)
Max Divisions (With Measurement Range: +/-10mv = Sens. 2mv/v) +/- 999999
Measurement Range +/- 39 mV
Max Sensitivity of Usable Load Cells +/-7mV/V
Max Conversions Per Second 300 conversions/second
Display Range - 999999 ; + 999999
No. of Decimals / Display Increments 0 - 4 / x 1 x 2 x 5 x 10 x 20 x 50 x 100
Digital Filter / Readings Per Second 0.060–7sec/5-300Hz (Analog,DeviceNet)
0.012-7sec/5-300Hz (Ethernet,Profibus)
Relay Logic Outputs N.3 - max 115 VAC ; 150mA
Logic Inputs N.2 - optoisolated 5 - 24 VDC PNP
Serial Ports RS-485 (RS-232)
Baud Rate 2400, 4800, 9600, 19200, 38400, 115200
Humidity (Non Condensing) 85 %
Storage Temperature -22° to 176°F (- 30° to + 80°C)
Working Temperature -4° to 140°F (- 20° to + 60°C)
Optoisolated Analog Output 16 Bit - 65535 Divisions 0-20 mA; 4-20 mA (max 300 ohm); 0-10 VDC; 0-5 VDC;
+/- 10 VDC; +/- 5 VDC (min 10 kohm)
Ethernet/IP Port RJ45 10Base-T or 100Base-TX (auto-sensing)
Profibus Port: Baud Rate
Profibus Port Addresses to 12 Mbit/s
1-99
DeviceNet Port: Baud Rate
DeviceNet Port: Addresses 125kbit/s, 250kbit/s, 500kbit/s
1.63
Modbus/TCP Port RJ45 10Base-T or 100Base-TX (auto-sensing)
Table 1-1. Specifications