11 test – Rice Lake Signal Conditioning Transmitter/Indicators User Manual
Page 33
Configuration 29
2.11 Test
1. Press and hold
and
to enter set-up menu. CALIb will be displayed.
2. Press
or
until tEst is displayed, press
.
3. Press
or
until desired parameter is displayed, press
.
4. For In and NU-CEL, current reading is displayed, press
.
For Out, press
until corresponding value of the out you want to change is flashing, press to change
the value, press
.
5. Press
twice to exit set-up menu.
Parameter
Choices
Description
In
N/A
Input Test - for each open input 0 is displayed, 1 is
displayed when the input is closed.
Out
0 *
1
Output Test -
Setting 0 opens the corresponding output .
Setting 1 closes the corresponding output .
ANALOG
ANALOG
Allows the analog signal to range between the minimum
and the maximum values starting from the minimum.
NA
Current output test
UOLt
voltage output test
NU-CEL
N/A
Millivolt Test - displays the load cell response signal in
mV with four decimals.
* - indicates default value.