Rice Lake Signal Conditioning Transmitter/Indicators - Manual (Page 47)

Operation 43
Digital Outputs Status
Digital Outputs Command
It allows control to the outputs status in EtHnEt mode (see Section 2.10 on page 27)
Bit a 1: output is closed; Bit a 0: output is open.
Setting bit 15 to 1 on the PLC, DeviceNet takes control of all the outputs, even if they are in different modes.
Status Register
Bit 0 OUTPUT 1 status Bit 4
Bit 1 OUTPUT 2 status Bit 5
Bit 2 OUTPUT 3 status Bit 6
Bit 3 Bit 7
Bit 0 OUTPUT 1 status Bit 8
Bit 1 OUTPUT 2 status Bit 9
Bit 2 OUTPUT 3 status Bit 10
Bit 3 Bit 11
Bit 4 Bit 12
Bit 5 Bit 13
Bit 6 Bit 14
Bit 7 Bit 15 Force Outputs
Bit 0 Cell Error
Bit 1 A/D Converter Malfunction
Bit 2 Maximum weight exceeded by 9 divisions
Bit 3 Gross weight higher than 110% of full scale
Bit 4 Gross weight beyond 999999 or less than -999999
Bit 5 Net weight beyond 999999 or less than -999999
Bit 6
Bit 7 Gross weight negative sign
Bit 8 Net weight negative sign
Bit 9 Peak weight negative sign
Bit 10 Net display mode
Bit 11 Weight stability
Bit 12 Weight within +/-¼ of a division around ZERO
Bit 13
Bit 14
Bit 15
Note