Rice Lake Signal Conditioning Transmitter/Indicators - Manual (Page 58)

54 SCT Weight Transmitter Operator’s Manual
in which:
s = 1 separator character (32 ASCII – space-).
Generally refer Section 3.5 “Alarms” on page 34.
Semi-Automatic Zero (Weight Zero-Setting For Small Variations)
The zero-setting will not be maintained after an instrument power-off.
The PC transmits: $aaZEROckckCR $01ZERO03CR
Possible instrument responses:
- correct reception: &&aa!\ckckCR
- incorrect reception: &&aa?\ckckCR
- the current weight is over the maximum value resettable: &aa#CR
Switching From Gross Weight To Net Weight
The PC transmits: $aaNETckckCR
$01NET5ECR
Possible instrument responses:
- correct reception: &&aa!\ckckCR
- incorrect reception: &&aa?\ckckCR
Switching From Net Weight To Gross Weight
The PC transmits: $aaGROSSckckCR $01GROSS5BCR
Possible instrument responses:
- correct reception: &&aa!\ckckCR
- incorrect reception: &&aa?\ckckCR
Reading Of Decimals And Number Of Divisions
The PC transmits: $aaDckckCR
$01D45CR
Possible instrument responses:
- correct reception: &aaxy\ckckCR
- incorrect reception: &&aa?\ckckCR
in which:
x = number of decimals
y = division value
The y field acquires the following values:
'3' for division value = 1;
'4' for division value = 2;
'5' for division value = 5;
'6' for division value = 10;
'7' for division value = 20;
'8' for division value = 50;
'9' for division value = 100;
Important