Rice Lake Signal Conditioning Transmitter/Indicators - Manual (Page 25)

Configuration 21
2.7 SCT20-IP (EtherNet/IP) Settings
1. Press and hold and to enter set-up menu. CALIb will be displayed.
2. Press or until EtHnEt is displayed, press .
3. Press or until desired parameter is displayed, press .
4. Press or until desired value is displayed, press .
5. Press twice to exit set-up menu.
Figure 2-5. SCT20-IP Menu Structure
Parameter Choices Description
SUAP nO * Little Endian
YES Big Endian
Allows selection of reading/writing of bytes.
1 PAddr A
b
C
d
192.8.0.141 *
Set IP address in the Ethernet/IP network.
SUbnEt A
b
C
d
255.255.255.0 *
Set Subnet mask
GAtUAY A
b
C
d
192.8.0.111 *
Set the Gateway address
* - indicates default value.
FILtEr PArA 0 SErIAL tESt Out-In EtHnEt
000000 P-tArE SEtP1
CALIb
SUbnEt 1 PAddr GAtuAY
NO
YES
SUAP
Ethernet