Yamaha DEQ5 - Manual (Page 30)

<Signal flow during POST SEND setting>
Analog audio signal •
I audio signal
Digital output terminal
Digital input terminal ^.
T ''Digital input terminal
- Digital output terminal
-External effecter such as SPX1000-
(2) IN Format
If the input signal is set to either “DIGITAL”, “PRE” or “POST” in the item “I/O MODE”, a digital system input
terminal is selected from the following in this item.
(ij IlN.FORMATl V2
• Y2: This is set when receiving the signal from the input terminal in Y2 format.
• AES/EBU: This is set when receiving the signal from the input terminal in AES/EBU format.
(3) Clock
In the same way as (2), if the input signal is set to either “DIGITAL”, “PRE” or “POST” in the item “I/O MODE”,
operation clock of the unit is selected.
; (illCLOCK l I N T E R N P L ;
• INTERNAL: This is set when operating with the
• AES/EBU: This is set when operating with the
• Y2: This is set when operating with the
• WORD CLK: This is set when operating with the
Emphasis
You can set whether to implement pre-emphasis and de-emphasis processing here in the process of A/D and D/A
conversion of the analog audio signal.
If the input audio signal is set to either “DIGITAL”, “PRE” or “POST”, on/off setting of de-emphasis processing
in the D/A conversion section of the unit is determined here.
i;g:;i I emphasx ^ OFF
• ON:
• OFF:
• AUTO: This is set to implement emphasis processing.
This is set not to implement
emphasis
processing.
This can be selected when the audio input signal is set to AES/EBU”.
This setting enables de-emphasis processing in the D/A conversion section in accordance with
the emphasis flag of the input signal automatically.
24