Example 2] when device no. is set to broadcast – Yamaha DEQ5 User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
[Example 2] When device No. is set to Broadcast
o
DEQ5 (Transmitting side)
------------>
DEQ5E (Receiving side)
i
Group No. 1
0
Device No.* (Broadcast)
DEQ5E (Receiving side)
GROUP No. 1
DEVICE No. 1
GROUP No. 1
DEVICE No. 2
DEQ5E (Receiving side)
GROUP No. 2
DEVICE No. 1
o
DEQ5E (Receiving side)
GROUP No. 2
DEVICE No. 2
0
DEQ5E (Receiving side)
GROUP No. 3
DEVICE No. 1
0
DEQ5E (Receiving side)
GROUP No. 3
DEVICE No. 2
When the setting DEQ5 remote address are made as shown above, only DEQ5E with Group Nos. set to “1” (0,
and © in the above case) respond to the remote control signal received from DEQ5, despite of the Device No.
settings of local address on the receiving side.
54