Connection – Yamaha DEQ5 User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2
. Connection
Please use digital audio cable (impedance 90-120Q shield type equilibrium transmission cable) for connection
with periphery equipment.
Using general analog audio cable (impedance 40-50Q shield type equilibrium transmission cable) could cause
trouble such as signal reflection due to mismatching impedance and transmission waveform turbulence.
Especially waveform turbulence with long cable and multi cable longer than 10 meters is noticeable.
If the length of the cable is longer than 100 meters, it is recommended that it should be terminated with a
resistor matching the impedance.of the cable, (connect the resistor between Pin 2 and Pin 3)
49