Q] before use, Before use, 2) precautions regarding rack mounting – Yamaha DEQ5 User Manual
Page 7: 3) power supply, 4) connecting cables, 5) pin assignment of the analog i/o xlr terminal
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Q] BEFORE USE
1. Before use
(1) Precautions
• Operating temperature - Use the unit in an environment with an ambient temperature of 10 to 35°C.
• Avoid exposing the unit to direct sunlight for long periods of time.
When using it outdoors, place the unit in the shade.
Avoid placing the unit near heaters, stoves, or other heat sources.
• Avoid environments which are subject to excessive dust.
• Avoid environments which are subject to excessive vibration.
• Do not forcibly bend or pull the power supply cord or cables.
• Avoid physical shocks to the operation keys and terminals.
• Since the DEQ5 contains digital circuitry, it may cause interference or noise if placed too close to TV sets or
radios. Place them a proper distance away from the DEQ5 when using them together.
• If there is a possibility of lightning, turn the power supply off and remove the plug from the outlet to prevent
noise effect from indoor wiring.
(2) Precautions regarding rack mounting
• Avoid mounting the unit on top of equipment which generates substantial amounts of heat, such as a power
amplifier.
If you must combine it in the same rack, keep it at a distance of at least lU away from other equipment.
The Yamaha ventilation panel VPl (sold separately) with ventilation holes is recommended as a blank panel.
1
....1
• 1 1 1 H □
O o
Î D o
1 1 1 1 1 1 1 1 1 [ 1 1 1 1 1 1 1 1 1 1 1 1 1 1
7|
1 iPID)
-VP1
(3) Power supply
• Be sure to use a power source intended for use in normal domestic applications to operate the unit. Do not use
any other power source.
• If you do not use the unit for prolonged periods of time, please remove the power supply plug from the outlet.
(4) Connecting cables
• When connecting sound cables, turn down the master volume in the mixer section or the volume of the power
amplifier. Noise generated during connection might cause damage to the speakers.
(5) Pin assignment of the analog I/O XLR terminal
• Pin assignment of the analog I/O terminal of the unit is as follows:
No. 1: Ground
No. 2: Hot
No. 3: Cold