Deleting event, Disabiing event, Caution regarding event setting – Yamaha DEQ5 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
<Deleting Event>
Press the “FLAT” key while the cursor is at the event number,and the event will be deleted. Event order after the
event is put in order and the event numbers increment by one.
<DisabIing Event>
Specify “NOP” in “MEM” item, and the event is disabled and memory does not change even if the event time
comes. Event order after the event will not change since the time information will remain. Changing to “NOP”
and setting memory number enables the event.
Caution regarding event setting
Set the time so that the time interval between an event and another event time is at least one second.
DEQ5 needs approximately one second at the most to recall the memory, (same for NOP)
When the timecode event is executed, recalling starts approximately one second before the time the specified
event time’s reached and the set program is developed at the specified time.
If you try to set the time between the event times less than one seconds in the above menu, E)EQ5 will display a
warning message and will not accept the data entry.
36