Yamaha DEQ5 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
[Example] When the “CONTROL SELECT” dial on the front panel is set to “2”
This unit
DEQ5E No. 1 (DEVICE No. 1)
RS-485
O O
B
DEQ5E No. 2 (DEVICE No. 2)
O O ^
• ^ ° O
When set to "2"
☆ It becomes the same status as the front panel o f the main unit DEQ5E (No. 2).
RS-485
RS-485
DEQ5E No. 3 (DEVICE No. 3)
o o
B
Operation carried out on the main unit front panel becomes effective [Refer to “3. Setting the communication
protocol” for details, (see page 42)] to DEQ5(E)s with the same communication protocols as the main unit and the
parameters of the main unit DEQ5 have no effect to them. This situation is supposing the same as that in which
DEQ5 front panel has moved onto DEQ5E. That is, all the operations for the DEQ5 front panel with remote
controll are the same as the operations carried out with an imaginary front panel of DEQ5E. (*1)
If you operate in this situation, the control system will function as follows.
39