Broadcast address – Yamaha DEQ5 User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Broadcast address
Setting the broadcast address to remote address enables you to transmit a command to a specified group at once.
[Example 1] When the group number is set to Broadcast
DEQ5 (transmitting side)
o
------------>
DE05E (Receiving side)
Group NO. * (Broadcast)
Device No. 1
0
DEQ5E (Receiving side)
GROUP No. 1
DEVICE No. 1
GROUP No. 1
DEVICE No. 2
e
DEQ5E (Receiving side)
GROUP No. 2
DEVICE No. 1
o
DEQ5E (Receiving side)
GROUP No. 2
DEVICE No. 2
DEQ5E (Receiving side)
GROUP No. 3
DEVICE No. 1
DEQ5E (Receiving side)
GROUP No. 3
DEVICE No. 2
When the settings of DEQ5 remote address are made as shown above, only the DEQ5E whose device No. is set to
“1” (®, ®, and ® in the above case) respond to the remote control signal received from DEQ5, despite the group
No. settings of local address on the receiving side.
53