Bulk dump, Bulk damp procedure – Yamaha DEQ5 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Bulk dump
Bulk dump function enables transmission and reception of various setting data inside the unit between an external
MIDI sequencer or computer, or another DEQ5(E) through the MIDI I/O terminal or the RS-485 terminal.
; ill
OUT
RS4S5
; tel
ITEM
MEMORY-;
: fóì
h40
1 ............... :
•-■' Type of transmission port................................................................. RS-485, MiDI
■ - Type of transmission data.................................................................. ALL DATA, SYSTEM, MEMORY, BANK
■■--Memory number or Bank name which transmits data.................. When set to aii the Memory or Bank data
is transmitted.
Bulk damp procedure
® Connect MIDI OUT or RS-485 terminal of the unit and MIDI IN or RS-485 terminal on the receiving side.
[Example] When transmitting data from the unit to another DEQ5.
(RS-485)
®
MIDI: Set the MIDI channel of the unit and that of the other side. [Refer to “9. MIDI control” (see page 33)]
RS-485: Set REMOTE ADDRESS in the UTILITY “RS-485 NETWORK” menu of the unit to the LOCAL
ADDRESS of the other equipment.
®
Prepare to receive bulk dump on the receiving side and set to standby status.
Make sure that “PROTECT” switch on the rear panel of the receiving DEQ5 is set to “OFF” when receiving
with DEQ5.
If protect is on, data cannot be received.
26