AERCO Modulex E8 Controls Guide - Manual (Page 101)

PR1: 02/23/12 Page 101 of 112
GF-115-C
OMM-0084_0D
AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 • Ph: 800-526- 0288
10. E8, BCM, AND BMM FAULT CODES
This section provides tables for identifying faults (with fault troubleshooting tips) and describes
the procedures required to clear a displayed fault code after the cause of the fault has been
corrected. Fault codes are displayed in the upper right area of the LCD display on the E8
Controller as shown in Figure 10-1.
NOTE
See the Trouble-Shooting Guide in Section 9 of Manual GF-115-
H for more detailed Fault Code descriptions and trouble-shooting
procedures.
Figure 10-1: E8 Controller Fault Code Location
Fault Codes are
Displayed Here
(i.e. E 70)