AERCO Modulex E8 Controls Guide - Manual (Page 89)

PR1: 11/30/12 Page 89 of 112
GF-115-C Modulex E8 Controller and BCM
Operations and Maintenance Manual
OMM-0084_0D
AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 • Ph: 800-526- 0288
8.5 GENERAL Menu
The GENERAL Menu contains a DATE/TIME Sub-Menu and a SERVICE Sub-Menu.
8.5.1 DATE / TIME Sub-Menu
This Sub-Menu is used to set the time, date, holiday schedule and, where necessary, enter
clock change settings (daylight savings time, etc.).
NOTE
All items in the following DATE/TIME Menu must be entered in
sequence. Press the Program Key to step through the menu
functions. Use the Rotary Knob to adjust/change entries. Press
the Program Key to store entries and sequence to the next
function.
Table 8-5: GENERAL Menu / TIME/DATE Sub-Menu and Parameters
FUNCTION DESCRIPTION ENTRY RANGE
TIME - DATE Sub-Menu
This Sub-Menu is used to set the time, date,
holiday schedule and, where necessary, enter
clock change settings (daylight savings time,
etc).
TIME Set current time (min., hours) 00:00 – 24:00
YEAR Set current year XXXX
MONTH Set current month 01 - 12
DAY Set currrent day 01 - 31
HOLIDAY Sub-Menu
This Sub-Menu sets the start and end dates
for Holiday (Vacation) periods where no heat
or hot water is required.
YEAR Set current holiday start year XXXX
MONTH START Set current holiday start month 01 - 12
DAY START Set current holiday start day 01 – 31
YEAR STOP Set current holiday end year XXXX
MONTH STOP Set current holiday end month 01 – 12
DAY STOP Set current holiday end day 01 - 31
CLOCK CHANGE Sub-Menu
This Sub-Menu is used in areas where
seasonal time changes are required for
“Daylight Savings“, etc.
MONTH START Set clock change start month 01 -12
DAY START Set clock change start day 01 – 31
MONTH END Set clock change end month 01 – 12
DAY END Set clock change end day 01 – 31
RETURN
When CLOCK CHANGE reappears, press
Program Key.