AERCO Modulex E8 Controls Guide - Manual (Page 22)

PR1: 11/30/12 Page 22 of 112
GF-115-C Modulex E8 Controller and BCM
Operations and Maintenance Manual
OMM-0084_0D
AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 • Ph: 800-526- 0288
Table 4-2: USER Menu Listing
FUNCTION DESCRIPTION ENTRY RANGE DEFAULT
INSTALLATION Sub-Menu
LANGUAGE Selects display language.
12 languages are
available.
ENGLISH
CONTRAST Adjusts display contrast -20 to 20 00
DISPLAY
SEL
Sets the day of the week or the sensor
temperature (°F) to appear in the display when
the swing-down panel is closed.
Day: SUN – SAT
T-OUTSIDE: Outside Temperature
FLOW TEMP (1/2): Flow Temp. For Heating
Circuit 1 or 2 supply
water temperature. (Only
if sensor is installed)
T-DHW: Domestic Hot Water
Temperature.
T-BOILER; Boiler Outlet Temperature.
T-ROOM (1 / 2): Room Temp, Heating
Circuit 1 or 2 (ONLY if
Remote Control is
connected).
See
DESCRIPTION
Column
- - - -
RETURN
Press Program Key to exit INSTALLATION Sub-
Menu.
HOT WATER Sub-Menu
1X DHW Not Applicable
T-DHW 1 Hot Water set point 50°F - 158°F 140°F
T-DHW 2 Not Applicable
T-DHW 3 Not Applicable
BOB-VALUE Not Applicable
CIRCL-P-
DHW
Not Applicable
RETURN
Press Program Key exit HOT WATER Sub-
Menu.