AERCO Modulex E8 Controls Guide - Manual (Page 83)

PR1: 11/30/12 Page 83 of 112
GF-115-C Modulex E8 Controller and BCM
Operations and Maintenance Manual
OMM-0084_0D
AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 • Ph: 800-526- 0288
Table 8-3: TIME PROGRAM Menu Sub-Menus and Parameters (Continued)
FUNCTION DESCRIPTION
ENTRY
RANGE
DEFAULT
HTG – PROG 1 Sub-Menu
The HTG-PROG 1 (Heating Program 1) Sub-
Menu is used to set the ON-OFF times for
Heating Circuit 1
The procedures for viewing/changing ON-OFF
times are identical to those previously described
for the CIRCL TIME Sub-Menu, except they
apply to the HTG PROGRAM 1.
The days/day groups are also identical to the
those shown in the CIRCL TIME Sub-Menu.
The associated ON / OFF times are as shown
In the DEFAULT column
MONDAY
View or change the pump ON – OFF times for
Monday.
Press the Program Key to view current settings.
Turn Rotary Knob to change displayed ON or
OFF time if required.
Press Program Key to store displayed ON or
OFF time and sequence the display to the next
function.
All ON and
OFF times
can be set
in 15
minute
increments
from
00:00 –
24:00
ON:
6:00h
OFF:
22:00h
TUESDAY Same as previous except for Tuesday. See prev. See prev.
WEDNESDAY Same as previous for Wednesday See prev. See prev.
THURSDAY Same as previous for Thursday See prev. See prev.
FRIDAY Same as previous for Friday See prev. See prev.
SATURDAY Same as previous for Saturday See prev. See prev.
SUNDAY Same as previous for Sunday See prev. See prev.
MO – FRI Same as above for Monday – Friday See prev. See prev.
SA – SU Same as previous for Saturday and Sunday See prev. See prev.
MO – SU Same as previous for Monday – Sunday See prev. See prev.
RETURN
Press Program Key to exit HTG – PROG 1 sub-
menu.
HTG – PROG 2 Sub-Menu
Sub-Menu Functions, processing procedures,
ranges and defaults are same as HTG PROG 1
above.
RETURN
Press Program Key to exit HTG – PROG 2 sub-
menu.