Gf-115-c, Modulex e8 controller and bcm – AERCO Modulex E8 Controls Guide User Manual
Page 105
PR1: 11/30/12
Page
105 of 112
GF-115-C
Modulex E8 Controller and BCM
Operations and Maintenance Manual
OMM-0084_0D
AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 • Ph: 800-526- 0288
Table 10-2: E8 Controller Fault Codes (Continued)
FAULT CODE
FAULT DESCRIPTION
Communication Fault
E 90
E8: Address 0 and 1 on BUS. IDs BUS 0 and 1 may not bee used
simultaneously
E 91
E8: BUS ID used. The set BUS ID is already in use by another device
E 99
E8: Internal failure
E 200
Communication Error HS1
E 201
Communication Error HS1
E 202
Communication Error HS1
E 203
Communication Error HS1
E 204
Communication Error HS1
E 205
Communication Error HS1
E 206
Communication Error HS1
E 207
Communication Error HS1
Internal Fault
E 81
E8: EEPROM error. The invalid value has been replaced with default value
(Check parameter values)