Point dc output, Specification – Toshiba Programmable Controller PROSEC T3 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Specification
32-point DC output
Type
Category
Output type
No. of output points
Insulating method
Rated load voltage
Range of load voltage
Max. load current
Voltage drop at ON
Leakage current at OFF
Delay
OFF - ON
ON - OFF
Output signal display
Module status display
External connection
No. of commons
No. of output points
per common
Common polarity
Derating condition
Internal current
consumption
Insulation resistance
Withstand voltage
Built-in fuse
Surge suppressor
Weight
Internal circuit
D0334
Transistor output
Current sinking
32 points, 2-word output (Y 2 W)
Photo-coupler
12 to 24Vdc
10 to 30Vdc
0.5 A/point, 5 A/common
1.5 V or less
0.1 mA or less (at 24 Vdc)
1 ms or less
1 ms or less
L£D display for all points, lit at ON, internal logic side
Fusing/extemai abnormal power supply LED
(FL. FH), lit at abnormal state_________
38-pin removable terminal block, M3.5
2 (insulated between commons)
16 points per common
negative (-) polarity
See NOTE on the ne)d page
5 Vdc, 210 mA or less
10 MQ (500 Vdc)
1500 Vac, 1 minute (between commons, between
internal and external circuits)
6 A/common X2
Diode
530g
36
PROSEC T3