Safety label, Safety precautions, Caution – Toshiba Programmable Controller PROSEC T3 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Safety Precautions
Safety Label
The safety label as shown on the right is
attached to the power terminal of the T3.
Remove the mount paper before wiring.
Peel off the label from the mount paper
and stick It near the power terminals
where it can be readily seen.
Contact Toshiba if the label is damaged.
A
CAUTION
A
Do not touch terminals
while power on.
Hazardous voltage can ^lock, bum or cause death.
Do not touch termirials while power on.
Read related manual thoroughly for safety.
Stick this seal on unit or near unit
Take off this sheet before wiring.
3
User’s
manual - Hardware V
Advertising