Point ac output, Specification – Toshiba Programmable Controller PROSEC T3 User Manual

Page 48

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

2. Specification

16-point AC output

Type

Category

No. of output points

Insulating rpethod

Rated load voltage

Range of load voltage

Max. load current

Voltage drop at ON

Leakage current at OFF

Min. load current

Max. innjsh current

Delay

OFF — ON

ON OFF

Output signal display

Module status di^lay

External connection

No. of commons

No. of output points
per common

Derating condition

Internal current

consumption

insulation resistance

Withstand voltage

Built-in fuse

Surge suppressor

Weight

Internal circuit

AC363

Triac output

16 points, 1-word output (Y 1 W)

Photo-coupler

100 to 240 Vac (50/60 Hz)

24 to 264 Vac (47 to 63 Hz)

2 A/points, 5 A/common

1.5 V or less

1.0 mA or less (at 100 Vac, 50 Hz)

2.4 mA or less (at 200 Vac, 60 Hz)

100 mA (24 Vac), 50 mA (100 to 240 Vac)

20 A/20 ms (point), 40 A/20 ms (common)

1 ms or less

1 ms+1/2cycle or less

LED di^lay for all points, iit at ON, interna) logic side

Fusing display LED (FL, FH), lit at fusing

20-pln removable terminal block, M3.5

2 (insulated between commons)

8 points per common

See NOTE on die next page

5 Vdc, 530 mA or less

l O M Q o r less (500 Vdc)

1500 Vac, 1 minute (between commons between
interna) and external circuits)

6 A/common X2

CR snubber circuit, varistor

500g

40

PROSEC T3

Advertising