Precautions for i/o modules – Toshiba Programmable Controller PROSEC T3 User Manual
Page 64
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. Precautions for I/O Modules
3.5
Precautions for relay
output modules
(1) The relay output module (R0364, R0363S) needs external 24
Vdc power for driving relays. (For details, see 2.3, I/O module
specifications.)
If external 24 Vdc power is not supplied, the LED (F) in the front
of the module will light.
(2) Because the relay output module does not have an built-in fuse
to protect from overcurrent, install a fuse appropriate to the load
current on the external wire. If the protective fuse is not
inserted, module patterns could be burn out when a load is
shorted.
R0364
(3) The relay output module does not have a built-in surge
absorption element. To connect an inductive load, always install
a surge absorption element in parallel with the load. For details
on selecting a surge absorption element, see 3.3 (5) and 3.4 (3).
56
PROSEC T3