Altera Floating-Point - Manual (Page 127)

Port Name Type Required Description
OPERATION
Integer Yes Specifies the operating mode. Values are
INT2FLOAT
,
FLOAT2INT
,
FLOAT2FLOAT
,
FLOAT2FIXED
, and
FIXED2FLOAT
. If this parameter is not specified, the
default value is
INT2FLOAT
.
When set to
INT2FLOAT
, the conversion of an integer
input to an IEEE floating-point representation output
takes place.
When set to
FLOAT2INT
, the conversion of an IEEE
floating-point representation input to an integer output
takes place.
When set to
FLOAT2FLOAT
, the conversion between IEEE
floating-point representations input and output takes
place.
When set to
FIXED2FLOAT
, the conversion of a fixed
point input to an IEEE floating-point representation
output takes place.
When set to
FLOAT2FIXED
, the IEEE floating-point input
conversion to fixed point representation output takes
place.
17-12 ALTFP_CONVERT Parameters
UG-01058
2014.12.19
Altera Corporation ALTFP_CONVERT IP Core
Send Feedback