Altera Floating-Point - Manual (Page 156)

Document Revision History
A
2014.12.19
UG-01058 Subscribe
Send Feedback
Document Revision History
This table lists the document revision history for the Floating-Point IP Cores user guide.
Date Document
Version
Changes Made
December 2014 2014.12.19
• Remove all references to the complex mode in
ALTFP_MATRIX_MULTIPLY.
• Updated ALTERA_FP_MATRIX_MULT and
ALTERA_FP_FUNCTIONS sections.
November 2013 7.0
• Added “ALTERA_FP_FUNCTIONS” on page 3–1.
• Added “ALTERA_FP_ACC_CUSTOM” on page 2–1.
• Updated Table 1–1 on page 1–1 to list ALTERA_FP_
FUNCTIONS and ALTERA_FP_ACC_CUSTOM.
• Updated the “ALTFP_MATRIX_INV” on page 17–1
section to include 4 x 4 and 6 x 6 dimensions.
• Updated “Rounding” on page 1–4 to clarify that the
code for round-to-nearest-even mode is
TO_NEAREST
.
• Removed Design Example section for “ALTFP_
MATRIX_MULT” on page 18–1.
• Removed device family support for HardCopy III,
HardCopy IV, Stratix II, and Stratix II GX devices
from “Device Family Support” on page 1–2.
November 2011 6.0 Updated “General Features” on page 1–2.
May 2011 5.0 Added “ALTFP_ATAN” on page 12–1.
January 2011 4.0 Added “ALTFP_SINCOS” on page 13–1.
© 2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are
trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at www.altera.com/common/legal.html . Altera warrants performance
of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
ISO
9001:2008
Registered
www.altera.com
101 Innovation Drive, San Jose, CA 95134